Uncategorized

Prothonotary Warblers Nesting Box

Bird Houses & Nesting Box Woodworking Plan - Prothonotary Warblers

Prothonotary Warbler use the below nest box.

Suitable Nestbox Size: ~ 6 inches tall. No perches at the entrance holes as they would aid predators.

Floor Dimensions: at least 5″ x 5″ .

Prothonotary Warblers Nesting Box on a Tree
Prothonotary Warblers Nesting Box on a Tree

Material to be used: Red Cedar (more durable than other wood material), rough cut boards or exterior-grade plywood at least 1/2″ thick. Unpainted. Ventilation openings in the floor and under the roof. Although some experts disagree with the notion that ventilation openings are needed at all. Please refer to this article for further information. This may also depend on location of nest box, exposure to direct sun as well as material used to build the nest box.

Entrance Hole: About 1.2″ in diameter to keep the larger birds out, about 4 inches above the floor.

Roof: Hinged, secured with shutter hooks. Sloped down, overlapping on the sides and the front reduces exposure to rain and makes it more difficult for predators to get to the chicks or eggs.

Hardware: Best to use corrosion resistant, stainless steel and dichromate plated screws

Predator Guard: An inverted metal cone attached below the nextbox will provide some protection against predators.

Nesting Box for Birds
Nesting Box for Birds

Position:

On poles, trees or attached to buildings about 5 – 7 feet off the ground.

Position nest far enough from roads, paths or trails to minimize disturbance.

Take nest box down after each breeding season, and repair and sanitize before reusing.

Related Articles

Check Also
Close
Back to top button